|
| | |
|
DP EDGE
The "DP EDGE" Deep Pocket Mortise Machine is used to quickly and accurately prep the edge of doors for commercial hardware, hinges and multi-point locksets. The DP EDGE is available as manual operation as shown or as a fully automatic CNC. This machine can be integrated into a new door line or an existing door line.
More Pictures
Video
Features
-
Machines long deep pocket locks and routes for the necessary faceplate.
-
The DP Edge will easily machine for any custom lock.
-
Gives door shops ability to machine specialty locks which will reduce lead times on custom orders.
-
Reduced labor and increases quality compared to using hand jigs.
-
Machines doors for 3 & 5 point lock systems from W&F, Winkhaus, Hoppe and more.
-
Commercial locks can be machined in 1 minute and multipoint locks in 3 minutes.
-
Will machine for any length lock and up to 4 1/2" deep.
-
Quick change stops are included for different lock heights.
-
Locks can be placed anywhere along the edge of the door.
-
Machines complete Euro Groove on the edge of the door.
-
Heavy duty rails and full length clamp ensures the pocket is always centered in the door.
-
Dust Collection hookups and air blowoffs are included on each router carriage.
-
Doors are rolled in from either end on a set of rollers.
-
Optional hinge carriage can be added for machining any custom hinge size and location.
Capabilities
Door Height:
|
|
Up to 10'0"
|
|
|
Door Width:
|
|
Up to 4'0"
|
|
|
Door Thickness:
|
|
Up to 2 1/4"
|
|
|
Lock Size:
|
|
Any Length, Up to 4 1/2" deep
|
|
|
Specifications
Machine Size:
|
12'L x 4'6"W x 5'H
|
Electrical Requirements:
|
120v 1phase 20AMP
|
Air Requirements:
|
1.5 CFM @ 90-100 PSI
|
Shipping Weight:
|
1500 lbs.
|
| |
| | |
|
|